Underground utility detection

See before you dig.

MIMO Detect is designing a new kind of underground utility detector. MIMO radar, a motorised axis and artificial intelligence work together to locate utilities reliably and clearly, before the first shovel goes in.

Explore the technology
  • Vénissieux, France
  • Since 2021
  • Designed and made in France
Prototype of the MIMO Detect underground utility detector MIMO radar + AI Prototype in R&D

The problem

15,000

utility strikes every year in France alone.

That is around 60 every working day. Gas, water, electricity, telecoms: a single mislocated utility is enough to halt a worksite, put a crew at risk and cut off a whole neighbourhood.

Street torn open after a gas pipe explosion
One utility strike can bring a whole neighbourhood to a standstill.
Lyon, cours Lafayette, 28 February 2008: a gas leak caused during roadworks triggers an explosion. One firefighter killed, around forty people injured and more than 1,300 residents forced from their homes, some for 32 months.

Crews at risk

Striking a gas pipe or a power cable can have serious consequences.

Worksites at a standstill

Idle machinery, slipping deadlines, costly emergency repairs.

Residents cut off

Water, gas, power or telecom outages for an entire neighbourhood.

The solution

MIMO radar, motorised axis and AI, combined in a single field tool.

MIMO Detect is developing a next-generation solution to detect and map underground utilities in an intuitive, usable way. The prototype is currently in the research and development phase.

MIMO Detect, front three-quarter view Front three-quarter 3D renderings of the prototype

Views

Finishes under study

  • Control tablet mounted on the handlebar
  • Folding frame for transport
  • Conceived, designed and made in France
01

MIMO radar

Several antennas transmit and receive at the same time, so the subsurface is observed from multiple angles on every pass.

02

Motorised axis

The radar scans the area automatically, for consistent, repeatable data acquisition.

03

Artificial intelligence

Our algorithms interpret the signal and locate utilities, with no radar expertise required.

How it works

From radar signal to located utility.

The MIMO Detect detector acquiring data in the field Acquisition · 3D rendering
Illustrative visualisation, simulated data.
Utilities marked on the ground with spray paint Utility marking

Who it is for

Built for everyone who works underground.

Workers in a worksite trench
01

Civil works contractors

Make excavation safer and avoid worksite shutdowns.

Technicians repairing a water main
02

Utility operators

Know exactly where your networks are, with confidence.

Aerial view of pedestrian crossings
03

Engineering firms & surveyors

Usable survey data for your drawings and GIS.

Excavator on a city street
04

Local authorities & developers

Protect public spaces and keep services running.

Aerial view of an industrial site
05

Industry & sensitive sites

Work safely where there is no room for error.

Demining and area clearance operation
06

Defence & counter-mine

Detect explosive devices and buried objects to secure operating areas.

2 minutes · 4 questions

Your input shapes our tool.

Do you work around underground utilities? Your answers directly guide how MIMO Detect is developed.

Question 1 / 425 %

You are…

Environmental commitment

Dig less, emit less.

Every trial hole avoided and every better-targeted excavation means less soil moved, fewer machines on site and less CO₂ emitted. MIMO Detect is designed to cut the carbon footprint of worksites right from the detection stage, with a non-destructive method that works from the surface.

Worksite set in a natural environment
01

Optimised excavation volumes

Precisely targeted digs: less soil excavated, removed and replaced.

02

Less time on site

Faster detection shortens interventions and overall worksite duration.

03

Fewer machines

Fewer excavators and truck runs, so less fuel burned.

The MIMO Detect effect on a worksite

Targeted dig Gas −0.80 m Sewer −2.40 m Drinking water −1.10 m Electricity −0.90 m Telecoms −0.60 m

Surface scanning

The radar moves along the road surface without disturbing the ground.

Detection as it passes

Each utility is located and marked, depth included.

Targeted dig

Less soil excavated, fewer machines and less time on site.

Conceptual illustration.

Our 3 values

01Sustainability comes first.
02Everything is conceived, designed and made in France.Made in France
03Contributing to a fairer society.

Research & development

From research to the field.

Radar, signal processing, artificial intelligence, mechatronics: we master the entire chain, from antenna to data. Our algorithms are tested on our test platform in Feyzin, near Lyon, where utilities have been buried according to different scenarios.

2021FoundedMIMO Detect is founded in Vénissieux, near Lyon.
2023First showcasesProofs of concept in 2D, 3D and then with AI, and first presentations at trade shows.
2025Working prototypeFirst working prototype. Presence at CES, SOFINS and Pollutec.
TodayResearch & developmentWe are continuing R&D to develop the prototype further.
Hover to reveal what’s next ↘
Next stepField testingFirst trials in real-world conditions.
ThenIndustrialisationMoving from prototype to an industrial product.
Goal 2029 Commercial launch The next chapter is written in the field.

Indicative roadmap.

What’s next?

Towards a digital twin of the subsurface.

Beneath our cities, knowledge of utility networks remains fragmented. Our ambition: for every detection to enrich a reliable picture of the subsurface, shared by utility operators, local authorities and contractors.

Aerial view of an urban crossroads Hover over the image to see under the road
  • Electricity
  • Street lighting
  • Gas
  • Hydrocarbons
  • Drinking water
  • Sewer
  • Telecoms
  • District heating

An illustration of our vision. Utilities shown for illustrative purposes only.

They support our innovation

Bpifrance Auvergne-Rhône-Alpes Region Infra 2050 PIXITI Group Detect Réseaux CDL equipment rental

The team

A team between the field and the signal.

Philippe AYMARDChairman, PIXITI Group
Jean-David BIGONIChief Executive Officer
Costin CACIUR&D Director
Matthieu LECLERCQSoftware and signal processing engineer
Maxime CRENIAUXCommunications and business development

FAQ

Your questions.

Another question? Write to us.

Not yet. Our technology is in the research and development phase, with a commercial launch targeted for 2029. Subscribe to our news to follow every step.

MIMO stands for “Multiple Input, Multiple Output”: several antennas transmit and receive at the same time. The subsurface is observed from multiple angles on every pass, which enriches the data our algorithms work with.

A conventional ground-penetrating radar produces cross-sections of the subsurface (radargrams) that require expert interpretation. MIMO Detect combines a multi-antenna radar, motorised scanning and artificial intelligence to show utilities in a clear, directly usable way.

Our goal is to detect every kind of underground utility: water, gas, electricity, telecoms and sewers.

Answer our questionnaire, follow us on LinkedIn or contact us directly. We are always happy to talk with subsurface professionals, industrial partners and investors.

Contact

Let’s talk.

Partnership, R&D collaboration, investment, press or simple curiosity: our team will get back to you.

2 rue Roger Planchon, 69200 Vénissieux, France contact@mimodetect.fr LinkedIn ↗
Your enquiry